Sheet Metal


(2.7 timmar)
(2.5 timmar)

Step By Step Training

Course Overview

System Requirements & Recommendations

Computer Specification Recommendations.

Save to watch later?
Login to save things

IronCAD will run on many different PC specs, even low powered ones. However if you are looking for good performance, we recommend the following specifications.


CPU: 2Ghz or higher.

The single core clock speed (e.g. 2.4Ghz), is far more important for IronCAD than having more processor cores. For example a dual-core 4Ghz will likely perform better than an octa-core 3.5Ghz.

RAM: 16GB or more

Note IronCAD can be run on less RAM than this, it is not essential, but a good baseline for perfomance is 16GB. If working on very large models or using many other programs at the same time, 32GB RAM might be worthwhile.

GPU: 2GB or more dedicated graphics (Nvidia Quadro is preferred).

Note IronCAD can also run without a dedicated graphics card (Intel Graphics), but for high performance, a dedicated graphics card is recommended. IronCAD can run on both gaming and workstation graphics cards, but for best performance a workstation graphics card is recommended. For large or complex modelling, more graphics memory (e.g. 6GB) will likely result in much better performance.

This tutorial uses the Mechanical Add-on, click here to download it.
This tutorial requires the MultiPhysics Add-on, click here to download it.
Download the 3D files used in this course
This tutorial requires the KeyShot Add-on, click here to download it.
Ladda ned Övningsfiler
08-556 185 48
Solidmakarna AB
Luntmakargatan 34
111 37 Stockholm
Kontakta IRONCAD Sverige